SeaROVER
  • Color zoom camera and ultra low light B/W camera
  • 180° tilt camera - NTSC or PAL
  • Articulating arm and BlueView Sonar available separately.
  • Two 1 hp horizontal thrusters and two 1/3 hp thrusters (Vertran)
  • Optional equipment: built-in ethernet extender, 2-function articulator, altimeter (auto altitude), rear facing camera, and BlueView sonar
SeaROVER
Detailed Information Below

SeaROVER Technical Specs

Overview Specifications Applications Related Products Downloads

The SeaROVER® is an extremely powerful, compact open-frame inspection class vehicle, that was designed with a Payload Centric approach, meaning that the ROV is built around the sensor.

  • The payload centric design of the SeaROVER is a radical departure from other inspection class ROV designs. While other ROV systems have tool sleds or modifications that allow them to accept additional sensors, the SeaROVER has an open frame designed to specifically to carry those sensors in an optimized position for the best flight stability
  • The payload centric SeaROVER is the ROV of choice for all high-resolution sonar inspection tasks.
  • The system includes the SeaROVER ROV, topside control unit, handbox controller, handbox cable, and rugged plastic shipping cases for the vehicle and the topside controller.
  • Sonar, 2x rotator, and tether all sold separately.
Specification Description
PERFORMANCE
  • Maneuverability: 4-axis translation
  • Operating Depth: 300 m (984 ft) of seawater
PHYSICAL CHARACTERISTICS
  • Size: 46 cm (18.0 in) high x 46 cm (18.0 in) wide x 122 cm (48 in) long
  • Weight: 32 kg (70 lb) for standard 2-horizontal thruster configuration, excluding ballast & installed options
THRUSTERS
  • Horizontal: Two 1 hp magnetically coupled brushless DC motors
  • Forward Static Thrust: 18.1 kg (40 lbs) per thruster
  • Reverse Static Thrust: 10.4 kg (23 lb) per thruster
  • Lateral/Vertical: Two 1/3 hp magnetically coupled brushless DC motor (Vertran configuration)
  • Propeller: Stainless steel
  • Nozzle: Nylon Kort
VIEWING SYSTEM
  • Camera 1: High-resolution color video - NTSC or PAL
  • Resolution: 470 lines / 576 lines PAL
  • Sensitivity: 0.1 lux @ 50 IRE
  • Camera 2: High resolution B/W video - NTSC or PAL
  • Resolution: 600 lines
  • Sensitivity: 0.003 lux @ 50 IRE
  • Lights: Variable intensity LED arrays - 1 port and 1 starboard - external to camera enclosure
  • Tilt Mechanism: 180° for both cameras simultaneously
OPTIONAL REAR FACING CAMERA
  • Camera: High resolution color video - NTSC
  • Resolution: 480 lines
  • Sensitivity: 0.01 lux @ 50 IRE
SENSORS
  • Heading: 0–360°, 1° resolution
  • Depth: ±1° of operating depth
SURFACE CONTROL UNIT & VEHICLE POWER SUPPLY PHYSICAL CHARACTERISTICS
  • Size: 37.1 cm (14.6 in) high x 56.2 cm (22.1 in) wide x 56.0 cm (22.0 in) long
  • Weight: 41 kg (90 lb)
SURFACE CONTROL UNIT & VEHICLE POWER SUPPLY ELECTRICAL SPECIFICATIONS
  • Input Power: 100–130 VAC or 200–250 VAC, 47–63 Hz - auto-sensing, single phase, 3000 Watts, 5000 VA maximum, depending on installed options. Adjustable current limiting for use with small generators
  • Output Power to Vehicle: 150-300 VDC 12 amps, isolated, regulated at vehicle
TETHER - Dual Coax
  • Diameter: 1.65 cm (0.65 in)
  • Weight in Fresh Water: Neutral
  • Weight in Air: 65 kg/305 m (143 lb/1000 ft) nominal
  • Breaking Strength: 900 kg (2000 lb) nominal
  • Peak Tension Load: 164 kg (360 lb) maximum
  • Minimum Bend Radius: 20 cm (8 in)
  • Construction: Outer yellow foam polyurethane flotation jacket over Kevlar braid
  • Conductors: (2) 75 ohm coax, (4) 16 AWG, and (2) 26 AWG twisted shielded pair
  • Maximum Length: 500 m (1640 ft)
TETHER - Single Coax
  • ​Diameter: less than 0.65 inches
  • Conductors: (1) 75 ohm coax, (4) 16 AWG, (1) 26 AWG twisted shielded pair
  • Port and harbor security tasks.
  • Ship hull inspections.
  • Dam and tunnel inspections.
  • Floating Petroleum Storage & Off-loading (FPSO) inspections.
  • Salvage operations.
  • Surveys
  • Search and rescue (SAR) operations.
  • Real-time monitoring of marine construction operations.
  • Pipe and Cable tracking.
Teledyne Benthos / 49 Edgerton Drive North Falmouth, MA 02556 USA / ISO 9001 Certificate / Terms and Conditions
Phone: (508) 563-1000 / Fax: (508) 563-6444
Copyright 2017 Teledyne Technologies Incorporated. All rights reserved.